
You Receive Pre Oiled T3/T4 Turbocharger with Gaskets and V-Band adapter comes with internal wastegate but can be removed to run externally gated!
Item is 100% Brand New.
Intake Inlet/ Outlet 3.00"/ 2.00"
Inlet / Outlet Diameter 3" / 2"
Compressor A/R 0.53
Compressor Inducer /Exducer (MM) 52.9 / 76.00
Compressor Trim 57
Exhaust (Turbo Manifold) Flange Standard T3/ T4 4-Bolt
Exhaust (Downpipe) Flange Standard 2.50" Inner Diameter V-Band or T04E 5 bolt (if running without v-band)
Turbine A/R 0.63
Turbine Inducer / Exducer (mm) 64/ 55.9
Turbine Trim 58
Internal wastegate setting: 8 PSI
The T3/T4 turbocharger is designed to be used on engines displacing 1.6L-2.5L and is typically good for around 400HP.
They are also commonly used in twin turbo applications. In this case those figures would be doubled 3.2L-5.0L engines up to 800HP.
Horsepower ratings are generally meant to express the turbochargers maximum airflow capability.
Recommended boost pressures are 7psi(.5 Bar) to 21psi(1.5 Bar) and boost pressures should not exceed 30psi(2 Bar).
Exceeding 21psi(1.5 Bar) of boost pressure can significantly reduce a turbochargers lifespan.
Generally speaking 14psi(1 Bar) is good for a 100% increase in horsepower from a naturally aspirated engine.
Also factory non-turbo engines without forged internal components on high octane pump gas (98-100 octane) it is not recommended exceeding 7psi (.5 Bar) of boost. Doing so could result in damaging your engine.
Notes:
Universal application. Additional parts will be needed to complete install. Please consult professional turbo installer for details