{"product_id":"toyota-hilux-3-0-diesel-2014-oex-dxa552m-alternator-12v-130a-check-fitment","title":"Toyota Hilux 3.0 Diesel 2014 - OEX DXA552M Alternator 12V 130A (Check Fitment)","description":"OEX DXA552M Alternator 12V 130A - Denso Style\r\n\r\nRESEARCHED APPLICATIONS - FITMENT CONFIRMATION REQUIRED\r\nMain researched application: Toyota Hilux, 2014, 3.0L diesel. DXA552M appeared in the Prolink vehicle lookup. The exact Hilux chassis\/engine code and full production date range were not retained in the collected lookup, so this is not a blanket fitment claim for all Hilux models.\r\n\r\nAdditional researched application: Toyota Hiace ZL, 2014, 3.0L diesel. The selected Prolink vehicle was TOYOTA HIACE KDH201\/KDH221, 3.0L 1KD-FTV, DOHC 16-valve turbo diesel direct injection, 4-cylinder, 80kW, van, rear-wheel drive, catalogue production range November 2006 to January 2019. This range describes the selected catalogue vehicle; confirm the exact alternator application before ordering.\r\n\r\nConfirm VIN\/chassis, engine, original alternator\/OE part number, connector (IR115), mounting, pulley alignment and required output before supply. No OE cross-reference was captured in this research. A registration lookup alone does not confirm fitment.\r\n\r\nOUTPUT AND INSTALLATION RESTRICTIONS\r\nThe researched vehicle lookups also offered an 85A alternator. This DXA552M is rated 130A. If replacing an 85A unit, the supplier recommends upgrading the alternator-to-battery cable and fuse. Check the original equipment and installation requirements; do not assume a direct replacement without these checks.\r\n\r\nOEX Alternator 12V 130A Denso Style - See Note\r\n\r\n• If the alternator warning lamp flickers during acceleration or deceleration, the issue may be related to a faulty ECM, not just the alternator.\r\n• If replacing the 85A alternator with either the 130A or 160A unit, it is recommended to upgrade battery cable and fuse from alternator to battery.\r\n• If the alternator cannot be fitted to the fixed mount on the engine block, the previous alternator bolt may have been overtightened, causing the bushes to be pushed in.\r\n• Push the bushes back out before fitting the replacement alternator.\r\n\r\nAdjusting Hole Diameter: M8x1.25\r\nMount Leg Thickness: 58mm\r\nPin Code: IR115\r\nPower Rating [Amp]: 130\r\nPulley Outside Diameter: 58mm\r\nPulley Section: 7 Groove\r\nRegulator Type: Internal\r\nRotation: CW\r\nSuits Unit Make: Denso\r\nVoltage: 12\r\nAlternator Mount: Single Leg\r\nItem Type: Alternator\r\nMount Cnt to Cnt: 165mm\r\nNew \/ Reman.: New\r\nWeight: 6.5kg\r\n\r\nInstallation notes:\r\nIf the alternator warning lamp flickers during acceleration or deceleration, the issue may be related to a faulty ECM, not just the alternator.\r\nIf replacing the 85A alternator with either the 130A or 160A unit, it is recommended to upgrade battery cable and fuse from alternator to battery.\r\nIf the alternator cannot be fitted to the fixed mount on the engine block, the previous alternator bolt may have been overtightened, causing the bushes to be pushed in. Push the bushes back out before fitting the replacement alternator.\r\n\r\nWarranty: 3yr Passenger 1yr Commercial","brand":"OEX","offers":[{"title":"Default Title","offer_id":68227000861040,"sku":"ALT - DXA552M","price":511.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0416\/7778\/3197\/files\/957f03a2-1d79-47a6-b0ee-2761584b9f95.jpg?v=1794522479","url":"https:\/\/turbobits.co.nz\/products\/toyota-hilux-3-0-diesel-2014-oex-dxa552m-alternator-12v-130a-check-fitment","provider":"Turbo Bits","version":"1.0","type":"link"}