Buy quality products from the knowledgeable turbo specialists with 12+ years in the business - Turbo Bits
AN8 PUSH LOCK HOSE ( 12.7mm - 1/2" I.D ) 400 series
Sold by 500mm lengths
TBR PEROFRMANCE 400 series push lock hose is designed for the use with our push-on fittings.
- Temp range -40°C (-40°F) to 100°C (212°F)
- Working pressure 250psi (17 bar)
- Suit AN8 Push-Lock hose ends
Note:
-On oiling systems and on all EFI fuel systems, clamps MUST be used to secure hose ends.
-Not suitable for submersible applications using unleaded fuels.
-Not for use with power steering or transmission & oil cooler lines.
-Due to the use of unknown additives in some fuels, we are unable to guarantee our rubber hoses compatibility with all fuels unless otherwise stated. We recommend the use of TBR Performance's PTFE series hose for all other types of fuels.
Turbo Bits recommends using push lock style hose and fittings only for turbocharger water lines or the turbo oil drains. For any other lines PTFE is recommended due to its resistance to both pressures and fluids. Please see our other listing so for all our AN Fitting Parts.